How to Add a remote controller
Tap the keypad and press the following:
* 1 2 3 1 2 3 * 6 *
a BLUE or GREEN LED emits and now entered into remote controller programming mode.
Press the button once on the remote controller to program.
You will get a BLUE or GREEN LED on the lock and tone for confirmation. You may enrol up to 8 remote controllers.
How to Delete a remote controller
Tap the keypad and press the following: * 1 2 3 1 2 3 * 7 * during the key sequence, a RED light and a long beep will sound. This indicates that the programming is successful.
* 1 2 3 1 2 3 * 7 *
during the key sequence, a RED light and a long beep will sound. This indicates that the programming is successful and you have removed ALL remote controllers from that lock.
Information about remote controller
- You cannot remove individual remote controllers.
- Some models can accept remote controllers and some models will not. It depends on the model number you have purchased. Contact KAS to confirm.
Please be advised this information and more can be found in the Etouch User Manual. This can be downloaded HERE.