installation

Lock-S LockKeeper App – How to setup Bluetooth and set room no.

Note: Bluetooth functionality with Lock-S has been deprecated. While this may still work, we cannot guarantee it. Download the Lockkeeper APP from the following links

Z-Wave Lock – Optimal polling interval for the control module

Manufacturer recommends maximum polling interval during setup of the lock device: 10800s polling This will minimise the time the lock connects to the Z-wave module and maximum the lock battery performance.

Z-Wave – Weather Rating

Yes, the KAS Z-wave digital lock can be used as an external door lock. It cannot be exposed to direct rain/wet weather. It can be installed on an outside door provided it has adequate partial or full cover so water does not leak into the keypad. The ...

ETouch Lock – How to reset the four digit App code?

How to Resolve In the event that you have forgotten your four digit App code. Delete the App from your mobile device Reinstall the App on your mobile device Log-in with the same  "Username", "Mobile number" and "email" When you get to enter your four ...

ETouch Lock – Latch not engaging when a valid code/card is presented

The spindle may have been dislodged from the lock face. Cause Incorrect installation a hard hit could knock the spindle lose if the door thickness is too large and the back handle in not packed out to support the spring Indications The internal ...

eKeys App – Setup a New Lock on your Account

Add a New Lock to your Smart Phone Ensure you have Bluetooth enabled on your smartphone Ensure the lock is powered with new batteries. Test it by wake up the keypad. Login to the mobile app Select ‘Add Lock’ on the tab bar Your phone will now search ...

eKeys App – How to setup & send One Time Password / Duration Password feature

How to set up? Login to KAS App and activate your new lock. See ‘Getting Started Guide’ online for instructions to setup/activate the lock. Tap the ‘arrow’ on the lock cell when it is highlighted and in range [IMPORTANT]. This ensures the clock is ...

ETouch Lock – Installation & Setup

Installation and Setup Lineation Select your lock height, and place a marking on the door where you want the lock to sit From this marking, measure out the back set (60mm or 70mm provided with lock) Measure out the other markings required that are ...

Lock-S Software – Installing LockKeeper

Note: Bluetooth functionality with Lock-S has been deprecated. While this may still work, we cannot guarantee it. 1. Install SQL Server on the computer. Download SQL2012: https://www.microsoft.com/en-US/download/details.aspx?id=29062 For WINXP, WIN7 ...

32-Channel RS485 NC/NO lift controller Installation

Premise This configuration guide will describe how to configure and wire the 32-Channel RS485 NC/NO lift controller with the NEO ACR V2 Specifications Relay output parameters Refer to the following table according to different brands and different ...

Install SQL Server for Lock-S on computers purchased after September 2025

Premise This guide is intended for computers purchased after September 2025 as they are not compatible with the previous version of SQL Server 2012 The first step when installing Lock-S software is to install the server. Follow the steps below. If ...

LMS to Lock-S Platinum Upgrade

Premise: This guide will instruct you on how to install your LMS to Lock-S hardware upgrade. Instructions Step 1) Remove your current locks from the doors. Step 2) Unscrew the back plate on the front-facing part of the lock. The screws are in the ...

KLB 400 Electric Bolt Wiring Diagram

Lock-S – Synchronizing Databases with a second computer

Premise This guide will provide the basic instructions on how to set up a secondary computer and have it access the same Lock-S database as the main computer. Note: While initial installations are included in the original price, subsequent ...

ACR Wiring Guides

Premise This guide will provide the wiring diagrams for the ACR in various usage scenarios. Wiring and Examples Wire Colors Example: Dual ACRs Normally Open with Electric Strike Example: Dual ACRs Normally Closed with Mag Lock Example: ACR with PIR

Electric Drop Bolt KLB200 – Installation Instructions

Please see attachment.

Lock-S Relay Module RM – Wiring and Programming Lift Controller RM

This document is intended for Electrical Installers only. Information contained herein is intended as a guide for suitably qualified Lift Controller Installers. The ACR should be wired to the RM with the ACR Brown wire connected to the RM RS485 A+ ...

KAS Cloud Web Console – User Guide

Setup and Configuration To access the KAS Cloud Web Console you need to have the app and set up the hardware. (Skip if completed) Click here if you have not done this already Using the KAS Cloud Web console requires gateways Login Page Click on the ...