Instructions

If you need to program an Access Control or Common Door. CLICK HERE

When programming a lock the following cards must be issued from the software and taped to the door in this specific order.

Create the following cards as required from the software before programming a lock..

Card order when setting the lock

*To find out what cards are required to reprogram a room, go to the ADEL software, select
ROOM from the menu bar, then create the associated cards under the required fields.

1. System Card *If you hear a low to high swoosh sound. please tap the card again. .You need to hear the chime
   
   • Swoosh = Factory Reset
   • Chime should be herd
2. Master Layer Card 
   
   • Note this is a special card, usually kept with management. A standard guest card will not work
   •  Select the Option: Storage area occupied by ( not required on A90 version)
3. Program Card
4. Foreman Zone Card
5. Maid Zone Card
6. Floor Zone Card
7. Guest Room Card
   
   • wait 3 seconds or until lights stop flashing
8. Clock Card
   
   • Test the guest card. If the door opens successfully then your lock is now programmed.
   • Note: This is a stamped time on the card and will put the same time on the lock as when it was created

VIDEO