26 Jun 2019 1 min read

How to change the working mode on the ESZ950 / ESD950. DIP switches settings

Locating DIP switches DIP switches are located under the plastic front cover . If you do not have DIP switches, you will have a different model and can not change your mode Working Mode Options

General guide

Locating DIP switches

DIP switches are located under the plastic front cover

If you do not have DIP switches, you will have a different model and can not change your mode

Working Mode Options

8 Jul 20252 min read

Mechanical Troubleshooting

Premise In the event of a suspected mechanical failure, you could check that the internal mechanism is triggering as intended. This is only done when a lock is accepting a card (green light, single beep), but is not unlocking the door. Note: This ...

General troubleshooting

14 Jun 202327 min read

KASAccess User Manual / Product Guide

Setting up KASAccess To start using KASAccess, you need to obtain login credentials from KAS. This can be done by contacting their customer service via phone or email. Once you receive your login details, you can log into KASAccess and access the ...

General guide

4 Nov 20222 min read

KASAccess Guest Bluetooth Keys

KASAccess Guest Keys - Bluetooth Guest Keys (Pin Codes or RFID Cards) when created have a Bluetooth key/s associated by default This is applied through the Unique Identifier section for new Guests, or if a Unique Identifier already exists please ...