Platinum Drilling Template Speeds up installation time by 50-80%! Suitable for tubular latch or mortise latch 70mm backset only Wraps around the door and clamped in place to easily and quickly mark the drill holes Use the notches on the side to align ...
Wraps around the door and clamped in place to easily and quickly mark the drill holes
Use the notches on the side to align the existing tubular latch or mortise latch centerline to fit the Platinum door handle relative to the same strike position in the existing door frame
Supports KAS TL, ML-S, ML-V latch types
Perfect for retrofit or new doors
The set includes both sides (left side and right side)
By System Card Locate the original System Card used to initially program the door. Note: you cannot use the PDA. Swipe the System Card once -> Red LED with rising tone Swipe the System card again -> Green LED with a single beep The lock is now ...
If you hear a long beep after you tap a card as shown below, it means your lock have weak batteries and needs to be changed immediately before the lock is completely dead. VIDEO