INFO If this message is shown on a new NEO face lock or a lock after it has been factory reset, the message is indicating that there has not been any authentication parameters set for the Admin user, once enrolling a Pin, Face or RFID tag for the ...
that there has not been any authentication parameters set for the Admin user, once enrolling a Pin, Face or RFID tag for
the Admin user the message won’t appear again.
Premise This configuration guide will describe how to configure and wire the 32-Channel RS485 NC/NO lift controller with the NEO ACR V2 Specifications Relay output parameters Refer to the following table according to different brands and different ...
Premise This troubleshooting guide will have a collection of various errors that you may encounter when using the NEO Lock. Please refer to the Table of Content to locate your issue. Troubleshooting Can't pair the ACR/lock to the app If the lock does ...
Preface This demonstration KAS Lock has been programmed with the following access credentials: Pin code Wake up the keypad by touching the keypad (using the back of your hand) Press 1234# RFID Cards and FOBs Move the RFID Card or Fob towards the ...